click on our logo to come inside |
Roper Electronic Engineering Ltd have specialised in the design, manufacture and repair of Automatic Voltage Regulators for the last 15 years. Our main business is the manufacture of replacement AVR's for obsolete unit's and those for special applications. In addition to our own range, we also stock a number of other manufacturers models in common use, including those from Newage/Markon, Contrology, Basler, Leroy Somer, Mecc-Alte and Marelli/Ansaldo. We normally hold around 1000 units in stock at any one time for same day despatch, and custom built units can be supplied on short lead times. Our range covers AVR's for small 2 pole generators up to Static Exciters with excitation currents in excess of 100 amps, as well as AVR's for use with high tension machines up to 11Kv. Our designs include both thyristor phase controlled and transistor pulse width modulated types with accessories such as Power Factor Controllers and Diode Failure Indicators. We can also supply AVR's for DC generators. Other spare parts associated with generators, ie Paralleling C/T's, Rotating Diodes, Power Resistors/Rheostats and Volts Trim Potentiometers are also held in stock. Most other manufacturers AVR's can be repaired if not encapsulated, and a service exchange facility can be provided with certain models. With many years of experience in AVR's and generators, and in particular ECC/ECL, we are able to give advice and assistance for any technical problems which may be encountered. Engineering, term applied to the profession in which a knowledge of the mathematical and natural sciences, gained by study, experience, and practice, is applied to the efficient use of the materials and forces of nature. The term engineer properly denotes a person who has received professional training in pure and applied science, but is often loosely used to describe the operator of an engine, as in the terms locomotive engineer, marine engineer, or stationary engineer. In modern terminology these latter occupations are known as crafts or trades. Between the professional engineer and the craftsperson or tradesperson, however, are those individuals known as subprofessionals or paraprofessionals, who apply scientific and engineering skills to technical problems; It is the task of the chemical engineer to select and specify the design that will best meet the particular requirements of production and the most appropriate equipment for the new applications. With the advance of technology, the number of unit operations increases, but of continuing importance are distillation, crystallization, dissolution, filtration, and extraction. In each unit operation, engineers are concerned with four fundamentals: (1) the conservation of matter; (2) the conservation of energy; (3) the principles of chemical equilibrium; (4) the principles of chemical reactivity. In addition, chemical engineers must organize the unit operations in their correct sequence, and they must consider the economic cost of the overall process. Because a continuous, or assembly-line, operation is more economical than a batch process, and is frequently amenable to automatic control, chemical engineers were among the first to incorporate automatic controls into their designs. Civil engineering is perhaps the broadest of the engineering fields, for it deals with the creation, improvement, and protection of the communal environment, providing facilities for living, industry and transportation, including large buildings, roads, bridges, canals, railroad lines, airports, water-supply systems, dams, irrigation, harbors, docks, aqueducts, tunnels, and other engineered constructions. The civil engineer must have a thorough knowledge of all types of surveying, of the properties and mechanics of construction materials, the mechanics of structures and soils, and of hydraulics and fluid mechanics. Among the important subdivisions of the field are construction engineering, irrigation engineering, transportation engineering, soils and foundation engineering, geodetic engineering, hydraulic engineering, and coastal and ocean engineering. The largest and most diverse field of engineering, it is concerned with the development and design, application, and manufacture of systems and devices that use electric power and signals. Among the most important subjects in the field in the late 1980s are electric power and machinery, electronic circuits, control systems, computer design, superconductors, solid-state electronics, medical imaging systems, robotics, lasers, radar, consumer electronics, and fiber optics. Despite its diversity, electrical engineering can be divided into four main branches: electric power and machinery, electronics, communications and control, and computers. The field of electric power is concerned with the design and operation of systems for generating, transmitting, and distributing electric power. Engineers in this field have brought about several important developments since the late 1970s. One of these is the ability to transmit power at extremely high voltages in both the direct current (DC) and alternating current (AC) modes, reducing power losses proportionately.
voltage regulator, avr, static exciter, automatic voltage regulator, static excitation, generator voltage regulator, roper electronics, excitation equipment, voltage regulation, contrology, ac generator, reg5, reg5c, reg26, avr6e, avr9c, avr15r, triavr15r, avr21b, avr25b, brf, electric construction, ecc, ecl, thr150, artemis, static excitation